Operator Name: Bryan Townley Mission: Hull Land Date: 10/31/2016 System: MCORDS - Depth Sounder Takeoff Time: 13:04:06 Landing Time: Notes: Lost data connectivity between the data system and the following files 18 min of data lost during the flight line. mcords3_0_20161102_184627_01_1324 mcords3_0_20161102_190439_00_0000 On the way to high altitude I had seen the issues creep up from last flight with noise. Total MCORDS Data Aquired: 1 TB Total MCORDS Flight Line Data Aquired: 992 GB -------------------Data Lines--------------------------------- Segment 4 - High Altitude Survey XML File: mcords3_20161102_161933_01 Start: mcords3_0_20161102_162007_01_0007 Stop: mcords3_0_20161102_165034_01_0157 Segment 5 - Survery Line 1 - High Altitude (Good Data Set) XML File: mcords3_20161102_165034_01 Start: mcords3_0_20161102_165034_01_0157 Stop: mcords3_0_20161102_172948_01_0659 Segment 6 - Survery Line 2 - Data looked bad so I quickly reprogrammed the DDS XML File: mcords3_20161102_173027_01 Start: mcords3_0_20161102_173028_01_0660 Stop: mcords3_0_20161102_173035_01_0661 Segment 7 - Low Altitude - Data connectivity lost otherwise a good data set XML File: mcords3_20161102_173058_01 Start: mcords3_0_20161102_173058_01_0662 Stop: mcords3_0_20161102_184627_01_1324 Segment 8 - Survery Line 3 - Low Altitude - Data Restart after I noticed that the files in the filesystem were not updating. XML File: mcords3_20161102_190439_00 Start: mcords3_0_20161102_190439_00_0000 Stop: mcords3_0_20161102_194108_00_0320 Segment 9 - Survery Line 3 - High Altitude Transition Bad Waveforms XML File: mcords3_20161102_194131_00 Start: mcords3_0_20161102_194131_00_0321 Stop: mcords3_0_20161102_194151_00_0325 Segment 10 - Survery Line 3 - Low Altitude Test Bad Waveforms XML File: mcords3_20161102_194713_00 Start: mcords3_0_20161102_194713_00_0326 Stop: mcords3_0_20161102_195208_00_0369 Segment 11 - Survery Line 3 - High Altitude (Good Data) XML File: mcords3_20161102_195719_00 Start: mcords3_0_20161102_195719_00_0000 Stop: mcords3_0_20161102_200854_00_0148 ------------------Noise Analysis------------------------------ Segment 1 - Noise Analysis XML File: mcords3_20161102_132003_00 Start: mcords3_0_20161102_132003_00_0000 Stop: mcords3_0_20161102_132052_00_0007 Expected ADC noise floor @ ADC -60.0 dBm Expected Rx noise floor @ ADC -51.0 dBm Expected levels only valid for param.presums = 1 Noise power (dBm) at each ADC rx input and relative to 50 ohm (dB): ADC 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Noise -13.9 -14.2 -16.4 -18.4 -16.8 -15.2 Rel -13.9 -14.2 -16.4 -18.4 -16.8 -15.2 Segment 2 - Noise Analysis XML File: mcords3_20161102_160640_00 Start: mcords3_0_20161102_132052_00_0007 Stop: mcords3_0_20161102_160708_00_0012 Expected ADC noise floor @ ADC -60.0 dBm Expected Rx noise floor @ ADC -51.0 dBm Expected levels only valid for param.presums = 1 Noise power (dBm) at each ADC rx input and relative to 50 ohm (dB): ADC 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Noise -50.2 -49.8 -49.8 -50.0 -52.3 -49.6 Rel -50.2 -49.8 -49.8 -50.0 -52.3 -49.6 ------------------TX Analysis-------------------------------- Segment 3 - TX Equalization Analysis XML File: mcords3_20161102_160918_00 Start: mcords3_0_20161102_161933_01_0000 Stop: mcords3_0_20161102_162002_01_0006 DDS_time_error (ns) /process/mcords/board0/mcords3_0_20161102_160924_00_0001.bin -2.47 0.00 -0.99 -1.25 0.00 -1.39 0.00 0.00 /process/mcords/board0/mcords3_0_20161102_160929_00_0002.bin -2.56 0.00 -1.19 -1.64 0.00 -1.92 0.00 0.00 /process/mcords/board0/mcords3_0_20161102_160934_00_0003.bin -2.66 0.00 -0.98 -1.46 0.00 -1.72 0.00 0.00 /process/mcords/board0/mcords3_0_20161102_160938_00_0004.bin -2.69 0.00 -0.95 -1.63 0.00 -1.66 0.00 0.00 /process/mcords/board0/mcords3_0_20161102_160943_00_0005.bin -2.33 0.00 -0.89 -1.21 0.00 -1.59 0.00 0.00 Mean Error (slope removed) -1.7 0.6 -0.6 -1.2 0.0 -1.9 -0.4 -0.6 PASS PASS PASS PASS PASS PASS PASS PASS DDS_amp_error (dB) /process/mcords/board0/mcords3_0_20161102_160924_00_0001.bin 1.5 0.0 0.3 1.3 0.0 0.4 Inf Inf /process/mcords/board0/mcords3_0_20161102_160929_00_0002.bin 1.5 0.0 0.4 1.2 0.0 0.4 Inf Inf /process/mcords/board0/mcords3_0_20161102_160934_00_0003.bin 1.5 0.0 0.6 1.4 0.0 0.6 Inf Inf /process/mcords/board0/mcords3_0_20161102_160938_00_0004.bin 1.5 0.0 0.4 1.2 0.0 0.5 Inf Inf /process/mcords/board0/mcords3_0_20161102_160943_00_0005.bin 1.3 0.0 0.4 1.2 0.0 0.4 Inf Inf Mean Error 1.5 0.0 0.4 1.3 0.0 0.5 Inf Inf PASS PASS PASS PASS PASS PASS FAIL FAIL Inf>3 Inf>3 DDS_phase_error (deg) /process/mcords/board0/mcords3_0_20161102_160924_00_0001.bin 2.4 0.0 -1.5 -9.0 0.0 -1.8 0.0 0.0 /process/mcords/board0/mcords3_0_20161102_160929_00_0002.bin 3.4 0.0 -1.2 -9.2 0.0 -2.3 0.0 0.0 /process/mcords/board0/mcords3_0_20161102_160934_00_0003.bin 3.2 0.0 -2.3 -7.8 0.0 -2.5 0.0 0.0 /process/mcords/board0/mcords3_0_20161102_160938_00_0004.bin 1.8 0.0 -1.4 -9.3 0.0 -1.6 0.0 0.0 /process/mcords/board0/mcords3_0_20161102_160943_00_0005.bin 0.7 0.0 -1.7 -10.9 0.0 -1.7 0.0 0.0 Mean Error (slope removed) 2.5 0.0 -1.7 -9.0 0.0 -2.1 0.0 0.0 PASS PASS PASS PASS PASS PASS PASS PASS ------------------RX Analysis------------------------------ Segment 3 - RX Equalization Analysis XML File: mcords3_20161102_160918_00 Start: mcords3_0_20161102_161933_01_0000 Stop: mcords3_0_20161102_162002_01_0006 Recommended equalization coefficients (averaged results) Date of processing: 02-Nov-2016 12:24:04, mocomp 2, wf/adc 5/5 bins 2473-2540 td settings mcords3_0_20161102_160924_00_0001 10.65 4.36 7.33 7.17 0.00 4.70 mcords3_0_20161102_160929_00_0002 7.26 2.01 4.92 5.86 0.00 2.53 mcords3_0_20161102_160934_00_0003 6.39 1.82 5.84 6.70 0.00 3.15 mcords3_0_20161102_160938_00_0004 6.90 3.27 8.66 6.74 0.00 3.05 mcords3_0_20161102_160943_00_0005 7.06 4.71 8.63 6.22 0.00 6.41 amp settings mcords3_0_20161102_160924_00_0001 3.0 0.6 1.1 3.1 0.0 2.9 mcords3_0_20161102_160929_00_0002 3.0 0.5 1.1 3.1 0.0 2.9 mcords3_0_20161102_160934_00_0003 3.0 0.5 1.1 3.1 0.0 3.0 mcords3_0_20161102_160938_00_0004 3.0 0.6 1.1 3.1 0.0 3.0 mcords3_0_20161102_160943_00_0005 2.9 0.6 1.1 3.1 0.0 3.0 phase settings mcords3_0_20161102_160924_00_0001 -36.7 -52.6 -45.2 -15.0 0.0 -45.7 mcords3_0_20161102_160929_00_0002 -36.8 -52.6 -45.0 -14.8 -0.0 -45.5 mcords3_0_20161102_160934_00_0003 -36.0 -52.5 -45.4 -14.1 -0.0 -46.0 mcords3_0_20161102_160938_00_0004 -37.6 -52.5 -44.6 -15.7 -0.0 -44.9 mcords3_0_20161102_160943_00_0005 -38.1 -52.7 -44.2 -16.4 0.0 -44.5 Rx Path 1 2 3 4 5 6 Original/Recommended/Difference td settings (ns): 6.96 1.50 5.55 6.41 0.00 3.04 7.65 3.23 7.08 6.54 0.00 3.97 0.69 1.73 1.53 0.13 0.00 0.93 Original/Recommended/Difference amp settings (dB): 2.9 0.6 1.1 3.1 0.0 2.9 3.0 0.6 1.1 3.1 0.0 3.0 0.1 -0.0 -0.0 0.0 0.0 0.1 Original/Recommended/Difference phase settings (deg): -37.3 -53.4 -44.2 -13.2 0.0 -43.1 -37.0 -52.6 -44.9 -15.2 0.0 -45.3 0.3 0.8 -0.7 -2.0 0.0 -2.2