MISSION:	
DATE:		20141113
SPECIAL ISSUES:	

Still writing to raid system and syncing to FO.

DATE NOTES: all segments using deconvolution settings unless noted otherwise

** Deconvolution mode
Start	20141113_150135_00_0001
Stop	20141113_150227_00_0012



open water in between:
start	20141113_150921_01_0001
end	20141113_151004_01_0010

Discard these:
20141113_151410_02_0000
20141113_151429_02_0004

20141113_151530_03_0000
20141113_151539_03_0002

20141113_153148_04_0003

discard:
segment 05 to 20141113_165505_05_0006

segment 6 some leads

segment 7 some leads

segment 11 looks good

** loading normal survey mode to collect land ice data over Burke island
start	20141113_173723_12_0000
stop	20141113_174309_12_0047

leads again in deconv mode
start	20141113_180117_13_0000
stop	0006

segment 14 also good


** TX and RX calibration at S68.5, 36,000ft
Start	20141113_205205_14_0028 (gui doesnt restart segmenets)
Stop	20141113_205256_14_0035
xml	radar_20141113_205205

xml not found for TX and RX calibration data, repeat:
Start	20141113_210633_16_0000
Stop	20141113_210715_16_0006
xml	radar_20141113_210633

TX log:
Original	-50.5	-35.8	28.4	0.0	-97.7	114.0	0.0	0.0
Mean	-36.7	-19.9	61.7	0.0	-81.1	123.9	0.0	0.0
Median	-36.7	-19.9	61.7	0.0	-81.1	123.9	0.0	0.0
Stdev	0.5	1.7	1.1	0.0	1.6	0.8	0.0	0.0
Delay Compensated Mean	-51.0	-19.9	39.9	0.0	-105.8	118.4	0.0	0.0
Writing /scratch/txequal_radar_20141113_210633.xml

RX log:
Rx Path
1	2	3	4	5	6
Original/Recommended/Difference td settings (ns):
0.00	0.00	0.00	0.00	0.00	0.00
-2.68	-7.95	-3.68	0.00	-6.52	-2.08
-2.68	-7.95	-3.68	0.00	-6.52	-2.08
Original/Recommended/Difference amp settings (dB):
0.0	0.0	0.0	0.0	0.0	0.0
0.3	-3.5	-1.4	0.0	-5.0	0.4
0.3	-3.5	-1.4	0.0	-5.0	0.4
Original/Recommended/Difference phase settings (deg):
0.0	0.0	0.0	0.0	0.0	0.0
-8.1	-29.6	-43.6	-0.0	-31.0	-43.5
-8.1	-29.6	-43.6	-0.0	-31.0	-43.5



** noise analysis
start	20141113_205433_15_0000
stop	20141113_205446_15_0002
Log:
========================================================
Loading data (0.0 sec)
  Path: /process/mcords/board0
  Match: mcords3_0_*_15_0001.bin
  Loading file /process/mcords/board0/mcords3_0_20141113_205440_15_0001.bin
  Loading wf 3, adc 1
  Loading wf 3, adc 2
  Loading wf 3, adc 3
  Loading wf 3, adc 4
  Path: /process/mcords/board1
  Match: mcords3_1_*_15_0001.bin
  Loading file /process/mcords/board1/mcords3_1_20141113_205440_15_0001.bin
  Loading wf 3, adc 5
  Loading wf 3, adc 6
  Loading wf 3, adc 7
  Loading wf 3, adc 8
Expected ADC noise floor @ ADC -62.0 dBm
Expected Rx noise floor @ ADC -45.0 dBm
Expected levels only valid for param.presums = 1
Noise power is in dBm:
-42.8	-43.0	-43.1	-43.3	-44.0	-42.0	-62.4	-62.5